BR 28y - pneumatic - DIN
Piggable valve
VALVE STYLE
Piggable valve
USAGE
- Low-pressure service
- Mixing or diverting service
- On/off service
VERSION
DIN
MEDIUM TEMPERATURE
-10
to 200 °C /
14
to
392 °F
SUPPLY
Pneumatic
VALVE SIZE
DN 50
to
DN 200
PRESSURE RATING
PN 25
to
PN 40
LINING
without
Special features
- Consisting of ball valve and actuator
- Piggable Ball Valve
- Inside diameter of pipe, according to DIN 2430
- Seat rings, spring loaded on one side
- Floating ball up to DN80, i.e. sealed by both seat rings
- Trunnion ball from DN 100
- Corrosion-resistant materials to withstand corrosive process media
- DIN ISO 5211 interface as standard
- PTFE V-ring packing loaded by disk springs
- TA-Luft
- Blow-out-proof shaft
- Anti-static version with conductive shaft bearing
- Leakage requirements according to DIN EN 12266 or API 598
- » General information about pigging systems
- For pipes and valves acc. to DIN2430
- High cleaning performance without any additional rinsing process
- Long service life (depending on media)
- Resistant to chemicals even with corrosive media
- Two distinctive sealing lips and a formed middle part enable it to run without any problems in bends
- Bi-directional operation mode, i.e. the pig is symmetric, therefore can be used in both directions
- A magnet in core of the pig allows use in automated systems
- Pigs maintain a constant and even run inside bends and valves
- Sealing lip diameter approx. 4 % larger than the pipe diameter for a much higher scrape performance
Accessories
- Hand-lever
- Manual gear box
- Locking facility
- Limit switches
- Solenoid valves
- Positioners
- Supply air pressure regulator/filter
- Changeable lips
Options
- Shaft extension
- Pneumatic and electric quarter-turn actuators
- Seat rings in PTFE-compounds
- Sealing in graphite
- Pigs with solid elastomer body
- Pigs in various special materials and designs
- Pigs screwed together in several parts
- Pigs made from highly resistant materials
- Magnetic pigs with powder filling without risk of magnet leakage
- Pigs in high temperature design
- Food approval for pigs
BR 28y - pneumatic - DIN can be combinated with the following actuations:
Special features:
- Single-acting and double-acting piston actuator
- Suitable for strict requirements in chemical plants
- Opening angle 90°
- Signal pressures up to 10 bar
- Torques from 5 to 11674 Nm
- Temperatures from –40 to +80 °C
- End positions adjustable within wide range (+5°/–15°)
- Diagonal or parallel square drive position
- Position indicator adjustable in steps of 45°
- Encapsulated spring assemblies
- Power transmission without clearance thanks to involute gearing
- Direction of rotation reversible without requiring additional parts
- Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
- Centering ring milled into the housing
- Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
- Simple attachment according to DIN EN ISO 5211
- Blow-out-proof travel stop screws
- Fast stroking speeds as standard
Special features:
- Single-acting and double-acting piston actuator
- Suitable for strict requirements in chemical plants
- Opening angle 90°
- Signal pressures up to 10 bar
- Torques from 18 to 1702 Nm
- Temperatures from –40 to +80 °C
- End positions adjustable within wide range (+5°/–15°)
- Additional pneumatic input at the top shaft end
- Diagonal or parallel square drive position
- Position indicator adjustable in steps of 45°
- Encapsulated spring assemblies
- Backlash-free force transmission thanks to involute gearing
- Direction of rotation reversible without requiring additional parts
- Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
- Centering ring milled into the housing
- Standardized attachment of valve accessories according to VDI/VDE 3845 / NAMUR and VDI/VDE 3847
- Simple attachment according to DIN EN ISO 5211
- Blow-out-proof travel stop screws
- Fast stroking speeds as standard
- Integrated Automation acc. to VDI/VDE 3847
Information
Support
Certificates
Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.
Pin product
Pin items on your list and contact us if you have any product-related questions.
Back to product selector