BR 20a - pneumatic - DIN
Ball valve
VALVE STYLE
Ball valve
USAGE
- Low-pressure service
- On/off service
VERSION
DIN
MEDIUM TEMPERATURE
-10
to 200 °C /
14
to
392 °F
SUPPLY
Pneumatic
VALVE SIZE
DN 15
to
DN 200
PRESSURE RATING
PN 10
to
PN 16
LINING
PTFE
Special features
- Consisting of PTFE-lined ball valve and actuator
- Suitable for (highly) corrosive process media
- DIN ISO 5211 interface as standard
- Straight-through flow path
- High Kv coefficients
- 5 to 8 mm PTFE lining
- Single-piece ball shaft
- Blow-out-proof shaft
- Replaceable PTFE seals
- PTFE V-ring packing loaded by disk springs
- TA Luft
- Face-to-face dimensions according to DIN EN 558, Series 1 or 3
- Leakage requirements according to DIN EN 12266 or API 598
Accessories
- Lever
- Locking facility
- Air filters
Options
- Stem extension
- Stainless steel body
- Calibrated seals
- Linings of special compounds, such as conductive PTFE
- Heating jacket
- Double packing
- Grooved flanges according to DIN EN 1092
- FDA-compliant seals
- Balls and seals made of different materials
The valve BR 20a - pneumatic - DIN can be combinated with the following actuations:
Special features:
- Rotary diaphragm actuator
- Max. opening angle 90 ±3°
- Signal pressures from 2.5 to 6.0 bar
- Temperatures from –35 to +90 °C
- Torques from 15 to 5619 Nm
- Powerful thrust at high stroking speed and minimum friction by using low-wear rolling diaphragms
- Backlash- and maintenance-free bearings
- Direction of action (fail-open/fail-close) depending on the attachment to the rotary actuator
- Travel stops externally adjustable to limit the opening angle
- Excellent control properties thanks to large travel
- Interfaces according to DIN EN ISO 5211 and VDI/VDE 3845
Special features:
- Single-acting and double-acting piston actuator
- Suitable for strict requirements in chemical plants
- Opening angle 90°
- Signal pressures up to 10 bar
- Torques from 5 to 11674 Nm
- Temperatures from –40 to +80 °C
- End positions adjustable within wide range (+5°/–15°)
- Diagonal or parallel square drive position
- Position indicator adjustable in steps of 45°
- Encapsulated spring assemblies
- Power transmission without clearance thanks to involute gearing
- Direction of rotation reversible without requiring additional parts
- Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
- Centering ring milled into the housing
- Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
- Simple attachment according to DIN EN ISO 5211
- Blow-out-proof travel stop screws
- Fast stroking speeds as standard
Special features:
- Single-acting and double-acting piston actuator
- Suitable for strict requirements in chemical plants
- Opening angle 90°
- Signal pressures up to 10 bar
- Torques from 18 to 1702 Nm
- Temperatures from –40 to +80 °C
- End positions adjustable within wide range (+5°/–15°)
- Additional pneumatic input at the top shaft end
- Diagonal or parallel square drive position
- Position indicator adjustable in steps of 45°
- Encapsulated spring assemblies
- Backlash-free force transmission thanks to involute gearing
- Direction of rotation reversible without requiring additional parts
- Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
- Centering ring milled into the housing
- Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
- Simple attachment according to DIN EN ISO 5211
- Blow-out-proof travel stop screws
- Fast stroking speeds as standard
Information
Support
Certificates
Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.
Pin items on your list and contact us if you have any product-related questions.
Back to product selector