
5573-1
Heating and district heating controller
USAGE
- Building automation
 
APPLICATION
- Meter data recording
 - Heating control
 - Domestic hot water
 - District heating
 - Local heat supply
 - Cooling control
 - Solar thermal systems
 - Temperature control
 
Special features
- Heating and district heating controller
 - SAM DIGITAL READY
 - Control of a primary heat exchanger or boiler
 - Max. one mixing and one non-mixing heating circuit (both outdoor temperature controlled) as well as control of DHW heating in the secondary circuit
 - Outdoor-temperature-controlled buffer storage tank control with solid fuel boiler and solar circuit control
 - Control of one outdoor-temperature-controlled heating circuit and a DHW heating with two valves in the primary circuit
 - Control of two outdoor-temperature-controlled heating circuits with two valves in the primary circuit
 - Optionally with icons on the display or plain text on the graphics display
 - Direct access to the operating modes and essential parameters of the individual control circuits using a rotary pushbutton
 - Enter and retrieve data intuitively by turning and pressing the button
 - 365-day clock with max. four time schedules and automatic summer time/winter time changeover
 - Max. three times-of-use per day (entered in steps of 15 minutes)
 - Room panels can be connected for the individual heating circuits
 - Demand-driven control by set point demand by subsequent controllers using an 0 to 10 V signal
 - Applications including solar thermal DHW available
 - Heating characteristic optionally based on gradient or four points
 - Flexible limitation of the return flow temperature
 - Adaptation: automatic adaptation of the heating characteristic (room temperature sensor required)
 - Optimization: calculation of the best possible activation and deactivation times for heating (room temperature sensor required)
 - Drying of jointless floors function with adjustable parameters
 - Controller flash EPROM (operating system) can be updated
 - Meter bus interface for communication with up to three meter bus units (optional)
 - Modbus communication using external modules
 - Configuration and parameter setting using memory module or online using USB Converter 3 and the TROVIS-VIEW Software
 - Data logging function
 - Trend-Viewer
 - Alarm list
 - Event list
 
Accessories
- Type 5227-4 Sensor for outdoor temperature
 - Type 5277 and Type 5267-3 (contact sensor) Sensors for flow, return flow, and storage tank temperature
 - Type 5257-11 (room panel) Sensor for room temperature
 - Mini module
 - Memory module
 - Data logging module
 - 55Bluetooth modul
 - USB Converter 3 with Datalogging Viewer Software
 - TROVIS-VIEW Software (free of charge)
 - RS-232/PC communication module
 - RS-485 communication module for Modbus RTU two-wire bus network
 - 4-port bus hub
 - SA5000 overvoltage protection for two-wire bus network
 - CoRe 02 Universal Bus Unit
 - Modbus TCP gateway
 - Modbus GPRS gateway
 - RF gateway
 - 55Viewer visualization and user interface
 
Options
- Version with high base
 - Version with M-bus interface
 - Version with M-bus interface and high base
 
Information
Support
DXF file from data sheet
- T 5573 [ZIP]
 
Software
- 
		Boot Manager
Tool zur Installation von Firmware-Updates
Tool for installing firmware updatesVersion 1.62[ZIP] - 
		Wichtige Hinweise zur Aktualisierung der Firmware auf Ihrem Gerät
Important information on updating the firmware on your device
[PDF] - 
		Firmware V 3.06.xxAusnahme: TROVIS 5573-11 behält V3.05.xx[B55]
Exception: TROVIS 5573-11 retains V 3.05.xx - 
		Firmware V 3.08.xx
[B55] 
Certificates
Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.
Show all documents for Type 5573-1
					Pin product
				
Pin items on your list and contact us if you have any product-related questions.
Back to product selector